Description

ADASH A4500 VA5 Pro is Multi tasking Analyzer :

• vibration analysis 
  
• thermal imaging 
  
• ultrasound measurement 

I’m function loaded. 

• Explore the most powerful Vibration Analyzer on the market.
• Use multitasking tool in order to analyze your machinery.
• Balancer, thermal imaging camera, ultrasound, bump test, ODS, MCSA – you name it… 

I can feel it… 

• FFT with up to 3 276 800 lines 

• 90 kHz frequency range 

• RAW signal recording 

• Overalls, FRF, Smax, Orbits, Centerline, Cepstrum etc. 

…you can analyze it. 

 I can see it… 

 …so you can see it. 

I can hear it… 

 …then you can hear it too. 

 I can recognize the point… 

 …so you take the right measurement. 

 I can amplify the movement… 

 …and I can do much more. 

ADASH A4500 VA5 Pro MODULE

MAIN MENU 

Analyzer, Route, Run Up, Recorder, Balancer, FASIT (Expert System), Stethoscope, Lubri, MCSA, Octave Analysis, Bump Test, ADS (Operating Deflection Shapes), Ultrasound, Camera, Thermal Imaging Camera, Picture Gallery 

 ANALYZER 

Select the type of the measurement (from simple overall values through FFTs and time signals to more advanced measurements with Proximity probes such as Orbits), set up the measurement settings according to your requirements (frequency range, sampling, units etc.) and take all the predefined measurements simultaneously. 

 BALANCER 

The balancer allows you to perform one or two plane balancing job of rotating parts such as industrial fans, blowers, spindles etc. 

 RECORDER 

A unique measurement mode with unappreciated value. Recorder “records” the raw signal from the sensor, means raw signal from the machine. This allows to make a post processing of the signal later on your PC. You can play this record again and again and apply any measurement setting to it. 

 IR CAMERA 

The thermal imaging camera gives you another sense. Find overheated bearings, loose electrical connections, blocked pipes on heat exchangers and other industrial problems. 

 FASIT 

FASIT (Fault Source Identification Tool) is an expert system for automatic detection of possible machine faults: 

• Unbalance 
• Misalignment 
• Looseness 
• Bearing faults 

 ROUTE 

The route module is used for day to day data collection of your factory machinery. Simply create your route tree with measurement points location in DDS software and take the measurements regularly. Transfer collected data to DDS software to watch the trends and analyze the data. 

 MCSA 

Motor current signature analysis is a useful tool for electric motors inspection. Especially for detection of broken rotor bars, air gap eccentricity, shorted turns in stator windings and power quality. 

OCTAVE ANALYSIS 

Octave analysis allows you to measure audible sound. Connect your ICP microphone and measure sound level and Octave spectrum with selectable 1/1, 1/3, 1/12,1/24 resolution. 

 ADS 

ADS – Animated Deflection Shapes software is based on the method of operating deflection shapes. This means we visualize the vibrations of certain machine by animation. During the animation the vibration movement is slowed down to very low frequency and the amplitude of the motion is increased so we can see the vibration. You can animate the machine motion directly on the VA5 Pro device! 

ULTRASOUND 

Measurement of sound inaudiable to the human ear – ultrasound. Typical application are air leak detection, electrical arcing or early bearing fault detection. 

RUNUP 

Similar to Analyzer mode where you can setup any measurement which you like. RunUp allows you to control the saving of data for example as soon as possible, or by speed change, time change etc. 

LUBRI 

Lubri is a maintenance tool used for monitoring and control of the lubrication process. Lubri measures the actual bearing lubrication status and informs the operator when the lubrication state is optimal. 

STETHOSCOPE 

Do not use a screw driver to listen your bearing noise anymore. Place the sensor on the bearing house and listen the machine / bearing noise with headphones. VA5 Pro enables to listen signals from 4 channels. Just switch between individual channels. Adjust the volume according to your needs. 

BUMP TEST 

An easy way how of measuring structure resonance frequencies. No need for any settings, just place the sensor on the structure and hit it with the appropriate hammer. 

 CAMERA 

The built-in camera helps you to organize maintenance jobs. Is there any visible oil leak, loose part or other issue? Capture it on camera and send it to responsible person for further action. 

 GALLERY 

All your pictures from camera, IR camera and measurement screenshots are stored in one place. The gallery is a useful management tool for all your captures. 

VIBRATION ANALYST DREAM  

Measure 4 vibration signals and 4 process values (temperature, pressure etc.) along with speed synchronously. Triaxial sensor friendly, proximity probes for displacement measurement, ultrasound microphone, acoustic microphone, thermal imaging camera, current clamp meter, stethoscope and more. 

Over 30 years of Adash experiences  

Analyze your data on site and enjoy the large screen size for playing with variable cursors, bearing fault frequencies indication and FFTs in cascade. A touchscreen and keyboard are at your service whenever you need it. 

DETAILS OF THIS VIBRATION.

• The VA5PRO allows you to measure more measurement types:
  • Vibration analyzer
  •  Balancer
  • RAW signal recorder
  • Thermal imaging camera
  • Machine faults autodetection
  • Route data collector
  • Sound analyzer
  •  Operating Deflection Shapes
  • Ultrasound detector
  • Run Up – Coast down
  • Lubrication monitoring
  • Stethoscope
• 8 CHANNEL SIGNAL ANALYZER
  • 4 AC inputs for vibration measurement
  • 4 DC inputs for process values measurement
  •  Tacho input (speed/trigger)

 

TECHNICAL SPECIFICATIONS OF ADASH A4500 VA5 Pro

 

 

VA5 Pro specifications 

Input channels: 

• 4 x AC, ICP® power supply on/off
• 4 x DC for process values
• 1 x TACHO for speed probe/external trigger 

Input range: 

• AC +/- 12 V peak-peak
• DC +/- 24V 

AD conversion: 

• 24 bit, 64 bit internal signal processing
• No AutoGain function! 

Dynamic range S/N: 

• 120 dB 

Frequency ranges (-3 dB): 

• Maximum range: 0.35 Hz – 90 kHz (1 Ch, 194 kHz sampling)
• Maximum range: 0.35 Hz – 25 kHz (4 Ch, 64 kHz sampling)
• Minimum range: 0.35 Hz – 25 Hz (4 Ch, 64 Hz sampling) 

Sampling mode: 

• Fully simultaneous for 4 channels 

FFT resolution: 

• Min. 100 lines
• Max. 3 276 800 lines 

Unit modes: 

• Analyzer – analytical measurements
• Data collector – route measurements
• Balancer – 1 and 2 plane on site balancing
• Run up – run up and coast down measurements
• Recorder – raw signal recording for later post analysis
• Stethoscope – listening of the bearing/machine noise
• FASIT – expert system for automatic fault detection
• MCSA
• Octave analyzer – hearable sound measurements
• Bump test – measurement of natural frequencies
• ADS – Animated Deflection Shapes (Operating deflection shapes)
• Ultrasound – measurement of ultrasound in 30 – 50 kHz range
• Camera
• IR Camera
• Gallery 

Display: 

• 1125 x 800 pixels 

Built-in camera: 

• 5 MPx, autofocus 

Thermal imaging camera (optionally): 

• 384 x 288 pixels
• -10°C ~ 150°C (or up to 250°C) temp. range
• 50 mK NETD sensitivity 

Processor: 

• Intel Atom 1.9 GHz 

Memory, Route: 

• 64 GB, max. 16 GB for one route, number of routes is limited by free memory only 

Data processing: 

• Real time FFT
• DEMOD – ENVELOPE analysis
• ACMT – low speed bearing analysis
• Order analysis
• User band pass analysis
• RPM measurement
• DC measurement
• Orbit measurement 

Raw signal recorder: 

• 64 kHz sampling frequency
• 4 Ch memory consumption 3 GB/hour
• 4 Ch total recording – 20 hours 

Trigger: 

• Manual, External, Signal level, Time
• Speed change, Time interval 

Interface: 

• USB 3.0, 2.0 compatible 

Operating temperature range: 

• -10˚C to +50˚C 

Power: 

• Battery (up to 8 hours of operation) 

 Case: 

• IP 65 rating, aluminium heavy duty 

Size & Weight: 

• 29,5 x 23 x 4,9 cm, 1,98 kg 

Languages: 

• English, Spanish, German, French, Portuguese, Russian, Czech, Hungarian, Polish, Romanian, Thai 

CONTACT US

• Opening Hours:  Mon-Fri: 8am – 7pm
• Call Us:                 0613863344 / 0982769511
• Email Us:             mtp@mtppro.com
• LINE ADD:          https://lin.ee/vDX2Omh
• FACEBOOK :       https://www.facebook.com/mtppro2006
• YOUTUBE :         https://www.youtube.com/@mataneepan251